How to Install a Bidet Attachment in About 5 to 8 Minutes (No Plumber)

Short answer: Turn off the water, take off your toilet seat, set the bidet on the bowl, put the seat back on, then connect the hose to your toilet's water line with the T-adapter in the box. Turn the water back on and check for drips. Most Aim to Wash attachments install in about 5 to 8 minutes with no tools beyond what is in the box or a basic wrench.

What you need

  • Your bidet attachment and the parts in the box (T-adapter and hose)

  • A towel for small drips

  • An adjustable wrench, just in case a fitting is tight

Step by step

  1. Turn off the water. Turn the valve behind the toilet clockwise until it stops.

  2. Flush to empty the tank.

  3. Take off the toilet seat. Unscrew the two bolts at the back of the seat.

  4. Place the bidet on the bowl. Line up its holes with the seat holes.

  5. Put the seat back on over the bidet and tighten the bolts.

  6. Connect the T-adapter between the water valve and the tank hose.

  7. Connect the bidet hose to the T-adapter.

  8. Turn the water back on slowly and check every connection for drips.

  9. Test it at low pressure first.

Which Aim to Wash attachment is fastest to install?

The Quick Release ($42) installs in about 5 minutes and you do not need to fully remove your seat. It also slides off in seconds when you want to clean it.

Quick answers

Do I need a plumber to install a bidet attachment? No. Bidet attachments connect to your toilet's existing water line.

Do I need electricity? No. Non-electric bidet attachments use water pressure only.

Will it fit my toilet? Most bidet attachments fit most standard toilets. Not sure? Email a photo of your toilet to info@aimtowash.com.

Shop easy-install bidets

Next
Next

Bidet Return Policies Compared: 90-Day Trial vs 30 Days Unopened